TLV320AIC21IPFBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV320AIC21 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Mode | SYNCHRONOUS |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC21IPFBR Overview
Space-saving is achieved by supplying it in the 48-TQFP package. It is adopted to package in the Tape & Reel (TR) way. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Voice-Band. A mounting type of Surface Mount is used for this device. A performance setting of -40°C~85°C allows it to operate normally. The board is integrated with 2 / 2 ADCs and DACs. Supply voltage is 2.7V~3.6V for the analog circuit. 1.65V~1.95V is the supply voltage for the digital circuit. In order to avoid reflections off the end of the transmission line, 48 terminations are used. The device has a 48-pin configuration. There are 48 pins on it. Its base part number TLV320AIC21 can be used to find more related parts. Based on the Surface Mount technology, the module is mounted to a PCB. Maintain a maximum voltage of 1.95V. In order to convert analog signals into digital signals, 2 A/D converters are used. The electronic part has been classified as Codecs. Minimum supply voltage should remain at 1.65V. The supply voltage is set to 1.8V. Power supplies of 1.83.3V are used to operate it. It is designed with 2 channels for data transmission. There should be no voltage greater than 2V on the analog input.
TLV320AIC21IPFBR Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
TLV320AIC21IPFBR Applications
There are a lot of Texas Instruments TLV320AIC21IPFBR CODECs Interface ICs applications.
- Image denoising
- Semiconductor fabrication
- Wire number reduction in a particular circuits
- Registration mark timing
- Autonomous vehicles & robots
- Spooling or level wind
- Half adders
- Linear measurement
- Robotic arm positioning
- Stagecraft
