TLV320AIC23BIPWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Number of Bits | 24 |
| Output Power | 23mW |
| Data Interface | Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Power Consumption | 23mW |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of ADC Channels | 1 |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 4 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
TLV320AIC23BIPWR Overview
Due to space constraints, it is supplied in the 28-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) is the packaging method used. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. As far as mounting types are concerned, it uses Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. Supply voltage 2.7V~3.6V is provided to the analog circuit. 1.42V~3.6V provides the supply voltage to the digital circuit. Transmission lines have 28 terminations to prevent signals from reflecting. This is a 28-pin electronic device. With 28 pins, it is configured. The base part number TLV320AIC23 can be used to find related parts. Voltage should not exceed 3.6V. It is classified as a Other Consumer ICs electronic part. At a minimum, the voltage should be kept at 1.42V. Digital signals are converted into analog signals using 2 D/A converters. Information is stored with 24 bits. Inputs include 3 analog signals. There are 4 analog outputs on the board. As there are 1 channels for ADCs, there is a maximum number of analog values that can be read simultaneously.
TLV320AIC23BIPWR Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
3 analog inputs
4 analog outputs
TLV320AIC23BIPWR Applications
There are a lot of Texas Instruments TLV320AIC23BIPWR CODECs Interface ICs applications.
- Code conversion
- Logical circuits
- Robotics
- Anomaly detection
- Motor speed /RPM readout
- Linear measurement
- Aerospace
- High-performance memory-decoding or data-routing applications
- Automatic health monitoring systems
- Automation
