TLV320AIC23BIPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Data Interface | I2C |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Power Consumption | 23mW |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 4 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC23BIPWRG4 Overview
In order to save space, it is packaged in the 28-TSSOP (0.173, 4.40mm Width) package. The packaging way of Tape & Reel (TR) is adopted. Its Stereo Audio type ensures high-efficiency performance in a range of applications. As far as mounting types are concerned, it uses Surface Mount. At -40°C~85°C, it can operate normally. It features 2 / 2 ADCs / DACs. The analog circuit is provided with the supply voltage of 2.7V~3.6V. The digital circuit is provided with the supply voltage of 1.42V~3.6V. There are 28 terminations used to prevent signals from reflecting off the end of the transmission line. In terms of electronics, it is a 28-pin device. With 28 pins, it is configured. Find more related parts by using its base part number TLV320AIC23. Ideally, the supply voltage should remain at 3.6V. Digital signals are converted from analog signals using 2 A/D converters. It is classified under the subcategory of Other Consumer ICs. Supply voltage should be maintained at 1.42V. The device is equipped with 3 analog inputs. It features 4 analog outputs. In this ADC, there are 1 channels, which represent the number of analog values that can be read at once.
TLV320AIC23BIPWRG4 Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
4 analog outputs
TLV320AIC23BIPWRG4 Applications
There are a lot of Texas Instruments TLV320AIC23BIPWRG4 CODECs Interface ICs applications.
- Robotic arms
- Metal forming & fabrication
- Steel mills
- Half adders
- Stagecraft
- Robotics
- Autonomous vehicles & robots
- Feature extraction
- High-performance memory system
- Multiplication
