TLV320AIC23BPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Bandwidth | 20 kHz |
| Data Interface | I2C, Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Power Consumption | 23mW |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 4 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC23BPWG4 Overview
As a space saver, it comes in the 28-TSSOP (0.173, 4.40mm Width) package. We have adopted the packaging method of Tube. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. As a mounting type, it uses Surface Mount. Operating performance -10°C~70°C permits it to function normally. The board is integrated with 2 / 2 ADCs and DACs. The analog circuit is provided with the supply voltage of 2.7V~3.6V. It receives a voltage of 1.42V~3.6V as its supply voltage. In order to prevent signal reflections from off the end of the transmission line, 28 terminations are used. There are 28 pins on this device. With 28 pins, it is configured. Its base part number TLV320AIC23 can be used to find other parts that are related. It is recommended to maintain the maximum supply voltage at 3.6V. Analog signals are converted to digital signals by means of 2 A/D converters. A part in this category is classified as subcategory Other Consumer ICs. It is recommended that the minimum supply voltage be kept at 1.42V. It features 3 analog inputs. A total of 4 analog outputs are included. There are 1 ADC channels which represent the number of analog values that can be read at the same time.
TLV320AIC23BPWG4 Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -10°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
4 analog outputs
TLV320AIC23BPWG4 Applications
There are a lot of Texas Instruments TLV320AIC23BPWG4 CODECs Interface ICs applications.
- Analog to digital conversion in the analog decoder
- Linear measurement
- Registration mark timing
- Automatic health monitoring systems
- Radiation therapy
- Motor feedback
- Robotics
- Robotics vehicle with the metal detector
- Material handling
- Image compression
