TLV320AIC23BPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -10°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Data Interface | I2C, Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Power Consumption | 23mW |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 4 |
| Length | 9.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC23BPWRG4 Overview
Space-saving reasons have led to it being packaged in a 28-TSSOP (0.173, 4.40mm Width) package. It is adopted to package in the manner of Tape & Reel (TR). Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type of this device is Surface Mount. Operating performance at -10°C~70°C makes it possible to operate normally. Integrated ADCs / DACs are available in 2 / 2. In the analog circuit, the supply voltage is 2.7V~3.6V. 1.42V~3.6V is the supply voltage for the digital circuit. 28 terminations prevent signals from reflecting off transmission lines. The device has 28 pins. 28 pins are connected to it. Its base part number TLV320AIC23 can be used to find more related parts. 3.6V is the maximum value of supply voltage. To convert analog signals into digital signals, there are 2 A/D converters. It is classified as a Other Consumer ICs electronic part. Maintaining a minimum voltage of 1.42V is recommended. There are 3 analog inputs on it. The device has a total of 4 analog outputs. This ADC has 1 channels, which represent the number of analog values that can be read at once.
TLV320AIC23BPWRG4 Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -10°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
4 analog outputs
TLV320AIC23BPWRG4 Applications
There are a lot of Texas Instruments TLV320AIC23BPWRG4 CODECs Interface ICs applications.
- Detecting interrupts in microprocesstor applications
- Medical industry
- Motor speed /RPM readout
- Wire number reduction in application that have multiple inputs
- Anomaly detection
- Food & beverage
- Cut-to-length
- Code conversion
- Motor feedback
- High-performance memory systems
