TLV320AIC23IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Output Voltage | 1V |
| Power Supplies | 1.53.3V |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Data Interface | I2C, Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC23IPW Overview
For space-saving purposes, it is packaged in 28-TSSOP (0.173, 4.40mm Width). It is adopted to package in the Tube way. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. It uses a mounting type of Surface Mount. When the operating performance is set to -10°C~70°C, it can operate normally. 2 / 2 ADC / DAC is integrated into it. 2.7V~3.6V of supply voltage are applied to the analog circuit. It is supplied with a voltage of 1.42V~3.6V to power the digital circuit. Transmission lines have 28 terminations to prevent signals from reflecting. 28-pin electronic devices are what it is. The board is configured with 28 pins. Find more related parts by using its base part number TLV320AIC23. Using the Surface Mount technology, it is mounted to a PCB. Ideally, the supply voltage should remain at 3.6V. This electronic part is classified into the subcategory of Other Consumer ICs. It is recommended that the supply voltage is maintained at 1.42V. The power supply is set to 1.53.3V. The conversion of digital signals into analog signals is done using D/A converters, and there are 2 D/A converters available.
TLV320AIC23IPW Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -10°C~70°C
2 / 2 ADCs / DACs
TLV320AIC23IPW Applications
There are a lot of Texas Instruments TLV320AIC23IPW CODECs Interface ICs applications.
- Food & beverage
- Motor speed /RPM readout
- Ball screw positioning
- High-performance memory-decoding or data-routing applications
- Converting
- Material handling
- Sawmills
- Aerospace
- Addition
- Subtraction
