TLV320AIC24IPFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC24 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC24IPFB Overview
Due to space constraints, it is supplied in the 48-TQFP package. As a packaging method, Tray is adopted. It can perform highly efficiently in various applications since it is a type of Voice-Band. This device employs the mounting type Surface Mount. A performance setting of -40°C~85°C allows it to operate normally. It is integrated with 2 / 2 ADCs / DACs. The analog circuit is provided with the supply voltage of 2.7V~3.6V. Digital circuits are powered by 1.65V~1.95V supply voltages. Transmission lines have 48 terminations to prevent signals from reflecting. The device has 48 pins. There are 48 pins on it. More related parts can be found by using its base part number TLV320AIC24. It is mounted to a PCB based on the Surface Mount technology. It is recommended to maintain the maximum supply voltage at 3.6V. Subcategory Codecs describes this electronic part. Maintaining a minimum voltage of 1.1V is recommended. The device operates with a supply voltage of 1.8V. Power supplies of 1.83.3V are required to operate it. Often in the process of converting digital signals into analog signals, there are 2 D/A converters. For data transmission, the device has 2 channels. 16 bits are used to store information. No analog input voltage should exceed 2V.
TLV320AIC24IPFB Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
TLV320AIC24IPFB Applications
There are a lot of Texas Instruments TLV320AIC24IPFB CODECs Interface ICs applications.
- Automatic health monitoring systems
- Material handling
- Steel mills
- Translating the decimal values to the binary
- Aerospace
- High-performance memory systems
- Web tensioning
- Ball screw positioning
- Wire number reduction in a particular circuits
- Position measurement
