TLV320AIC24KIPFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV320AIC24 |
| Pin Count | 48 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 20mW |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of ADC Channels | 1 |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 5 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Number of Analog Outputs | 3 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC24KIPFB Overview
Space-saving reasons have led to it being packaged in a 48-TQFP package. We have adopted the packaging method of Tray. This electronic part is categorized as a type of Voice-Band, making it capable of providing high-efficiency performance in a variety of applications. Surface Mount is the mounting type employed by this device. At -40°C~85°C, it can operate normally. Integrated ADCs / DACs are available in 2 / 2. The analog circuit receives 2.7V~3.6V as a supply voltage. A 1.65V~1.95V supply voltage is applied to the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. In electronic terms, it is a kind of 48-pin device. The board has 48 pins configured. The base part number TLV320AIC24 can be used to find related parts. 3.6V should be the maximum value of the supply voltage. Electronic parts classified as Codecs are located in this subcategory. Maintaining a minimum voltage of 1.1V is recommended. It operates with the supply voltage of 1.8V. Digital signals are converted into analog signals with 2 D/A converters. Information is stored with 16 bits. 5 analog inputs are available on this device. A total of 3 analog outputs are included. No analog input voltage should exceed 2V. ADC channels represent the number of analog values that can be read simultaneously.
TLV320AIC24KIPFB Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
5 analog inputs
3 analog outputs
TLV320AIC24KIPFB Applications
There are a lot of Texas Instruments TLV320AIC24KIPFB CODECs Interface ICs applications.
- Galvanometer scanners
- Autonomous vehicles & robots
- Automated Guided Vehicles (AGV)
- High-performance memory systems
- Robotics
- Material handling
- Oil & gas production
- Off-Highway Vehicles (OHV)
- Addition
- Linear measurement
