TLV320AIC24KIPFBG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV320AIC24 |
| Pin Count | 48 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 20mW |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 5 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Number of Analog Outputs | 3 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC24KIPFBG4 Overview
Due to space constraints, it is supplied in the 48-TQFP package. Tray packaging method is used. Due to the fact that this part is of the type Voice-Band, it is capable of delivering high-efficiency performance in a wide range of applications. A mounting type of Surface Mount is used for this device. When the operating performance is set to -40°C~85°C, it is able to operate normally. The board is integrated with 2 / 2 ADCs and DACs. An analog circuit is supplied with a voltage of 2.7V~3.6V. Supply voltage is set to 1.65V~1.95V for the digital circuit. The transmission line is terminated with 48 terminations to prevent reflection of signals. This is a 48-pin electronic device. It is configured with 48 pins. Using its base part number TLV320AIC24, it can be used to locate parts that are related. Voltage should not exceed 3.6V. Analog signals are converted into digital signals using 2 A/D converters. This electronic part is classified into the subcategory of Codecs. Maintaining a minimum voltage of 1.1V is recommended. A voltage of 1.8V is required to operate the device. The device is equipped with 5 analog inputs. 3 analog outputs are available on it. It is recommended not to exceed 2V for analog input voltage. This ADC has 1 channels, which represent the number of analog values that can be read at once.
TLV320AIC24KIPFBG4 Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
5 analog inputs
3 analog outputs
TLV320AIC24KIPFBG4 Applications
There are a lot of Texas Instruments TLV320AIC24KIPFBG4 CODECs Interface ICs applications.
- Mobile equipement
- Automatic health monitoring systems
- Wire number reduction in application that have multiple inputs
- X-Y positioning
- Filling
- Anomaly detection
- Timber products
- Food & beverage
- Servo motors
- Spooling or level wind
