TLV320AIC25CPFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC25 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 3V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC25CPFB Overview
Due to space constraints, it is supplied in the 48-TQFP package. The packaging way of Tray is adopted. Due to the fact that this part is of the type Voice-Band, it is capable of delivering high-efficiency performance in a wide range of applications. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to 0°C~70°C, it is able to operate normally. Integrated ADCs / DACs are available in 2 / 2. Supply voltage 2.7V~3.6V is provided to the analog circuit. 1.65V~1.95V is the supply voltage for the digital circuit. To prevent signals from reflecting off of the transmission line, there are 48 terminations. Essentially, it is an electronic device with 48 pins. With 48 pins, it is configured. Its base part number TLV320AIC25 can be used to find more parts like it. Using the Surface Mount technology, it is mounted to a PCB. 3.6V should be the maximum value of the supply voltage. There are 2 A/D converters used to convert the analog signals into digital signals. There is subcategory Codecs for this electronic part. Minimum supply voltage should remain at 1.1V. In order to operate, it must be supplied with a voltage of 1.8V. A 1.83.3V power supply is needed to operate it. For data transmission, the device has 2 channels. It should not be possible to exceed 3V for the analog input voltage.
TLV320AIC25CPFB Features
Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
TLV320AIC25CPFB Applications
There are a lot of Texas Instruments TLV320AIC25CPFB CODECs Interface ICs applications.
- Semiconductor fabrication
- Radiation therapy
- Counting applications
- Code conversion
- High-performance memory system
- Digital systems
- Backstop gauging
- Autonomous vehicles & robots
- Filling
- Electronics industry
