TLV320AIC25CPFBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC25 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 3V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC25CPFBRG4 Overview
As a space saver, it comes in the 48-TQFP package. It is adopted to package in the manner of Tape & Reel (TR). This electronic part is categorized as a type of Voice-Band, making it capable of providing high-efficiency performance in a variety of applications. It employs Surface Mount as its mounting type. Using 0°C~70°C as the operating performance allows it to operate normally. It consists of 2 / 2 ADCs/ DACs. 2.7V~3.6V of supply voltage are applied to the analog circuit. Supply voltage is set to 1.65V~1.95V for the digital circuit. Signals are prevented from reflecting off the end of transmission lines by 48 terminations. It is a kind of 48-pin electronic device. There are 48 pins configured on this board. Using its base part number TLV320AIC25, it can be used to locate parts that are related. Surface Mount technology is used for mounting it to a PCB. 1.95V should be the maximum value of the supply voltage. As a result of analog signals being converted into digital signals, there are 2 A/D converters. Subcategory Codecs applies to this electronic part. It is recommended to maintain a voltage of 1.65V as the minimum value. There is no supply voltage for it. With a power supply of 1.83.3V, it runs. The data transmission channel count is 2. It should not be possible to exceed 3V for the analog input voltage.
TLV320AIC25CPFBRG4 Features
Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
TLV320AIC25CPFBRG4 Applications
There are a lot of Texas Instruments TLV320AIC25CPFBRG4 CODECs Interface ICs applications.
- Food & beverage
- Backstop gauging
- X-Y positioning
- Textile manufacturing
- High-performance memory system
- Full adders
- Metal forming & fabrication
- Material handling
- Aerospace
- Analog to digital conversion in the analog decoder
