TLV320AIC29IRGZTG4
| Parameters | |
|---|---|
| Signal to Noise Ratio (SNR) | 92 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 24 b |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 2 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 95 |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC29 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.6V |
| Interface | I2S, SPI, Serial |
| Max Supply Voltage | 4.2V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 53 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 19mW |
TLV320AIC29IRGZTG4 Overview
In order to save space, it is packaged in the 48-VFQFN Exposed Pad package. Tape & Reel (TR) is the packaging method used. Its Stereo Audio type ensures high-efficiency performance in a range of applications. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to -40°C~85°C, it can operate normally. It is equipped with a total of 1 / 2 ADCs and DACs. An analog circuit is supplied with a voltage of 3V~3.6V. Digital circuits are powered by 1.65V~1.95V supply voltages. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. In terms of electronics, it is a 48-pin device. It is configured with 48 pins. More related parts can be found by using its base part number TLV320AIC29. This device is mounted on a PCB which uses the Surface Mount technology. 4.2V should be the maximum value of the supply voltage. This electronic part is classified into the subcategory of Other Consumer ICs. Maintaining a minimum voltage of 1.1V is recommended. Powered by a 3.6V supply voltage, it can run. There are 3 analog inputs on the device. As there are 1 channels for ADCs, there is a maximum number of analog values that can be read simultaneously. An analog output can be sampled from numerical values using 2 DAC channels.
TLV320AIC29IRGZTG4 Features
Embedded in the 48-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
1 / 2 ADCs / DACs
3 analog inputs
TLV320AIC29IRGZTG4 Applications
There are a lot of Texas Instruments TLV320AIC29IRGZTG4 CODECs Interface ICs applications.
- Subtraction
- Printing
- Position measurement
- High-performance memory system
- Half adders
- Automation
- Linear measurement
- Food & beverage
- Automated Guided Vehicles (AGV)
- Detecting interrupts in microprocesstor applications
