TLV320AIC3110IRHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TLV320AIC3110 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Output Power | 1.29W |
| Bandwidth | 20 kHz |
| Data Interface | I2C, Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 13mW |
| Max Output Power | 1.3W |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 91 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 32 b |
| Number of Analog Inputs | 3 |
| Harmonic Distortion | 10% |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 2 |
| S/N Ratio, ADCs / DACs (db) Typ | 91 / 95 |
| Number of Analog Outputs | 4 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC3110IRHBT Overview
For space-saving reasons, it is supplied in a 32-VFQFN Exposed Pad package. It is adopted to package in the Tape & Reel (TR) way. This electronic component is of the type Audio, allowing it to provide high-efficiency performance in various applications. The mounting type of this device is Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. 1 / 2 ADCs and DACs are integrated into it. An analog circuit is supplied with a voltage of 2.7V~3.6V. 1.65V~1.95V is the supply voltage for the digital circuit. In order to avoid reflections off the end of the transmission line, 32 terminations are used. It is a kind of 32-pin electronic device. The pins are configured as 32. Its base part number TLV320AIC3110 can be used to find more related parts. Maintain a maximum voltage of 5.5V. To convert analog signals into digital signals, there are 1 A/D converters. Subcategory Other Consumer ICs describes this electronic part. The minimum value of supply voltage should be maintained at 1.1V. Operating voltages as low as 3.3V can be used. The conversion of digital signals into analog signals is done using D/A converters, and there are 2 D/A converters available. The data transmission channel count is 2. The device is equipped with 3 analog inputs. The device has a total of 4 analog outputs.
TLV320AIC3110IRHBT Features
Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
1 / 2 ADCs / DACs
1 A/D converters
3 analog inputs
4 analog outputs
TLV320AIC3110IRHBT Applications
There are a lot of Texas Instruments TLV320AIC3110IRHBT CODECs Interface ICs applications.
- Switching function
- Cut-to-length
- Servo motors
- Material handling
- CT and MRI scanning machinery
- Code conversion
- Autonomous vehicles & robots
- Robotic arm positioning
- Wire number reduction in a particular circuits
- Radiation therapy
