TLV320AIC3253IRGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | PowerTune™ |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TLV320AIC3253 |
| Pin Count | 24 |
| Operating Supply Voltage | 1.95V |
| Power Supplies | 1.8V |
| Interface | 2-Wire, I2C, I2S, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | I²C, Serial, SPI™ |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 1.5V~1.95V |
| Voltage - Supply, Digital | 1.26V~1.95V |
| Power Consumption | 4.5mW |
| Signal to Noise Ratio (SNR) | 100 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 32 b |
| Number of Analog Inputs | 4 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 0 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 99 / 98 |
| S/N Ratio, ADCs / DACs (db) Typ | 100 / 99 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLV320AIC3253IRGET Overview
A 24-VFQFN Exposed Pad package is supplied for space savings. As a packaging method, Tape & Reel (TR) is adopted. As a type of Stereo Audio, this electronic part is able to deliver high-efficient performance in various applications. The mounting type is Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. It features 0 / 2 ADCs / DACs. Supply voltage 1.5V~1.95V is provided to the analog circuit. Digital circuits are powered by 1.26V~1.95V supply voltages. The transmission line is terminated with 24 terminations to prevent reflection of signals. It is a kind of 24-pin electronic device. There are 24 pins configured on this board. By using its base part number TLV320AIC3253, you can find more related parts. It is recommended to maintain the maximum supply voltage at 3.6V. Subcategory Other Consumer ICs applies to this electronic part. Minimum supply voltage should remain at 1.1V. The power supply is set to 1.8V. It is able to operate from the supply voltage of 1.95V. The conversion of digital signals into analog signals is done using D/A converters, and there are 2 D/A converters available. The PowerTune? series electronic part is compatible with a wide variety of applications. It is equipped with 4 analog inputs. There are 0 ADC channels which represent the number of analog values that can be read at the same time.
TLV320AIC3253IRGET Features
Embedded in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
0 / 2 ADCs / DACs
4 analog inputs
TLV320AIC3253IRGET Applications
There are a lot of Texas Instruments TLV320AIC3253IRGET CODECs Interface ICs applications.
- Analog to digital conversion in the analog decoder
- Cut-to-length
- Automated Guided Vehicles (AGV)
- Linear distance measurement
- Stagecraft
- Wire number reduction in a particular circuits
- Anomaly detection
- Translating the decimal values to the binary
- Feature extraction
- Converting
