TLV320AIC33IGQE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 80-VFBGA |
| Surface Mount | YES |
| Number of Pins | 80 |
| Weight | 50.207005mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 80 |
| Type | Stereo Audio |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Other Consumer ICs |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Base Part Number | TLV320AIC33 |
| Pin Count | 80 |
| Power Supplies | 1.83.3V |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Number of Bits | 24 |
| Data Interface | I²C, Serial, SPI™ |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 14mW |
| Max Output Power | 500mW |
| Signal to Noise Ratio (SNR) | 92 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 24 b |
| Number of Analog Inputs | 10 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 92 / 100 |
| S/N Ratio, ADCs / DACs (db) Typ | 92 / 100 |
| Number of Analog Outputs | 7 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 740μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLV320AIC33IGQE Overview
For space-saving purposes, it is packaged in 80-VFBGA. It is adopted to package in the manner of Tray. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. It employs Surface Mount as its mounting type. At -40°C~85°C, it can operate normally. The board is integrated with 2 / 2 ADCs and DACs. Supply voltage 2.7V~3.6V is provided to the analog circuit. It receives a voltage of 1.65V~1.95V as its supply voltage. There are 80 terminations used to prevent signals from reflecting off the end of the transmission line. Essentially, it is an electronic device with 80 pins. The board is configured with 80 pins. More related parts can be found by using its base part number TLV320AIC33. Supply voltage should never exceed 3.6V. The electronic part has been classified as Other Consumer ICs. 1.1V should be the minimum value of supply voltage. Power supplies of 1.83.3V are used. In order to convert digital signals into analog signals, there are 2 D/A converters. A total of 24 bits are provided for storing information. There are 10 analog inputs on it. It features 7 analog outputs.
TLV320AIC33IGQE Features
Embedded in the 80-VFBGA package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
10 analog inputs
7 analog outputs
TLV320AIC33IGQE Applications
There are a lot of Texas Instruments TLV320AIC33IGQE CODECs Interface ICs applications.
- Code conversion
- Anomaly detection
- Flight simulators
- Elevators
- Speed synchronization of multiple motors in industries
- Wind turbines
- Data transfer
- Sawmills
- Microprocessor
- Robotic arm positioning
