TLV3401CD
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3401 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
TLV3401CD Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Drain output type for this comparator.The part is shipped by Tube .The device is designed with 8 terminations.Electronic comparator is a part of Comparator family.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.In total, it contains 1 elements.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching TLV3401 .There is a quiescent current of 950nA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.For normal use of the device, the nominal supply current should be 640nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 550nA .A maximum current of 250pA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 120dB .
TLV3401CD Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401CD Applications
There are a lot of Texas Instruments TLV3401CD linear comparators applications.
- Alarm and Monitoring Circuits
- Self-diagnostics
- Battery-Powered Electronics
- Mobile Communications
- Lithium ion battery monitoring
- Factory automation & control
- Automotive
- Laptop Computers
- General-Purpose, Low-Voltage Applications
- Ultra-Low Power Systems
