TLV3401CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3401 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 550nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401CDBVR Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.A comparator with an output type of CMOS, Open-Drain is being used.Ready for shipping in Tape & Reel (TR) package.As you can see, the comparator has5 terminals.Other Comparator like the device play a important role in the industry.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.The type of the chip can be classified as General Purpose .The total number of elements is 1 .The device contains 5 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.5 pins are present on the comparator.Alternatively, you may search for TLV3401 to find more pin-to-pin solutions for your specific needs.A quiescent current of 950nA is displayed by this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 550nA in order to use the device normally.A current supply greater than 550nA may cause the comparator to malfunction.The voltage formula shows that the part has a voltage gain of 120dB .The device is acceptable to pack by TR .
TLV3401CDBVR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401CDBVR Applications
There are a lot of Texas Instruments TLV3401CDBVR linear comparators applications.
- Limit Comparators
- Appliances
- Infotainment & cluster
- Security Detection Systems
- Ultra-Low Power Systems
- Lithium ion battery monitoring
- Window Comparators
- Window Comparators
- High-Speed Sampling Circuits
- RC Timers
