TLV3401CDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3401 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401CDBVT Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .The comparator has a type CMOS, Open-Drain output.We ship the part through Tape & Reel (TR) .There are5 terminals on the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 1 elements in it.The pinout of the component starts from 5 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.5 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3401 .The comparator presents a quiescent current of 950nA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 640nA .A current supply greater than 550nA may result in the comparator malfunctioning.You are allowed to input a maximum current of 250pA into the device.According to the voltage formula, the part has a voltage gain of 120dB .Often found in ADC circuits, this device is packed in TR .
TLV3401CDBVT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401CDBVT Applications
There are a lot of Texas Instruments TLV3401CDBVT linear comparators applications.
- Automotive
- Power Supervision
- Point of load regulators
- Infotainment & cluster
- Body Control Modules
- Wearable Devices
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- Limit Comparators
- Current and voltage sensing
