TLV3401ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3401 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401ID Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Open-Drain output type.We ship the part through Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 1 elements in it.As a result, it contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator has 8 pins.Search TLV3401 to find more pin-to-pin solutions.In this comparator, the quiescent current is 950nA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.Input current to the device cannot exceed 250pA .According to the voltage formula, the part has a voltage gain of 120dB .Normal operation requires 15V operating supply voltage.
TLV3401ID Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401ID Applications
There are a lot of Texas Instruments TLV3401ID linear comparators applications.
- DC/DC and AC/DC power supplies
- Handheld Instruments
- Wireless Base Stations
- Window Comparators
- High-Speed Sampling Circuits
- Notebooks and PDAs
- Current and voltage sensing
- Metering Systems
- Laptop Computers
- Security Detection Systems
