TLV3401IDBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 77.1mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3401 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 77.1mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401IDBVRG4 Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .The comparator has an output type of CMOS, Open-Drain .This device is designed in Tape & Reel (TR) case.As you can see, the comparator has5 terminals.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 1 elements in it.The board includes 5 pins.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .This comparator has 5 pins.You can find more pin-to-pin solutions by searching TLV3401 .A quiescent current of 950nA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 640nA .If the current supply exceeds 640nA , the comparator could malfunction.Based on the voltage formula, the voltage gain of the part is 120dB .Packed in TR , this device is for general uses (often in ADC circuits).
TLV3401IDBVRG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDBVRG4 Applications
There are a lot of Texas Instruments TLV3401IDBVRG4 linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Security Detection Systems
- Wearable Devices
- Self-diagnostics
- Alarm and Monitoring Circuits
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Zero-Crossing Detectors
- Metering Systems
- Mobile Communications
