TLV3401IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3401 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401IDBVT Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .A comparator with a CMOS, Open-Drain output is used here.This device is designed in Tape & Reel (TR) case.5 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.As a result, it contains 5 pins.In general, mounting type Surface Mount is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .This comparator has 5 pins.You can search TLV3401 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 950nA volts.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 640nA .An excess of current supply over 550nA could result in malfunction of the comparator.A maximum current of 250pA can be supplied to the device.The voltage formula shows that the part has a voltage gain of 120dB .To maintain the output quality, 1 channels work together.Comparator electronics is necessary to have a voltage of 15V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3401IDBVT Features
CMOS, Open-Drain output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDBVT Applications
There are a lot of Texas Instruments TLV3401IDBVT linear comparators applications.
- Point of load regulators
- Appliances
- Hand-Held Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- RC Timers
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Lithium ion battery monitoring
- Zero-Crossing Detectors
