TLV3401IDBVTG4
| Parameters | |
|---|---|
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 77.1mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3401 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Nominal Supply Current | 550nA |
| Power Dissipation | 77.1mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
TLV3401IDBVTG4 Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.Output type CMOS, Open-Drain is used for this comparator.The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.In total, it contains 1 elements.Electronic comparator has 5 pins.The type of mounting recommended is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.This comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV3401 .As a result, this comparator displays a quiescent current of 950nA .Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 550nA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 550nA .The voltage formula shows that the part has a voltage gain of 120dB .For normal operation, there should be 15V operating supply voltage applied.The device is packaged in TR and is often used in ADC circuits.
TLV3401IDBVTG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDBVTG4 Applications
There are a lot of Texas Instruments TLV3401IDBVTG4 linear comparators applications.
- Power Supervision
- Security Detection Systems
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Mobile Phones and Tablets
- Set Top Boxes
- Notebooks and PDAs
- Mobile Communications
- Alarm and Monitoring Circuits
- Battery-Powered Electronics
