TLV3401IDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 142mW |
| Nominal Supply Current | 640nA |
| Power Dissipation | 142mW |
| Max Supply Current | 640nA |
| Current - Output | 10mA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 30 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV3401IDG4 Overview
The product is packaged in SOIC to facilitate transportation.8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical General Purpose comparator.As a result, it contains 8 pins.The comparator consists of 8 pins.There is a quiescent current of 950nA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.There is a maximum current that can be input into the device of 250pA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 120dB .There is no need to exceed 125°C in terms of temperature.Comparator electronics cannot be operated at a temperature lower than -40°C .A comparator is designed to operate at a maximum supply voltage of 16V .A minimum supply voltage of 2.7V is permitted for this comparator.1 channels cooperate together to maintain the output quality.The operating supply voltage for normal operation should be 15V .This device is rated for 10mA mA output current.
TLV3401IDG4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDG4 Applications
There are a lot of Texas Instruments TLV3401IDG4 linear comparators applications.
- DC/DC and AC/DC power supplies
- Wireless Base Stations
- Window Comparators
- Lithium ion battery monitoring
- Simple Analog-to-Digital Converters (ADCs)
- General-Purpose Portable Devices
- Self-diagnostics
- High-Speed Differential Line Receiver
- Infotainment & cluster
- Appliances
