TLV3401IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3401 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 550nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401IDR Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Open-Drain .Ready for shipping in Cut Tape (CT) package.8 terminals are found on the comparator.The electrical component here belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .This is a 1 element comparator.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 8 pins.You can search TLV3401 if you are looking for more pin-to-pin solutions.A quiescent current of 950nA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 550nA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 550nA .Input current to the device is limited to 250pA .The voltage gain of the part is indicated by 120dB in the voltage formula.This device is usually used in ADC circuits (packaged in TR ).
TLV3401IDR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDR Applications
There are a lot of Texas Instruments TLV3401IDR linear comparators applications.
- Laptop Computers
- Window Comparators, Multivibrators
- Battery-Powered Electronics
- Building automation
- General-Purpose, Low-Voltage Applications
- Current and voltage sensing
- Threshold Detectors
- Portable and Battery-Powered Systems
- Battery management and protection
- Limit Comparators
