TLV3401IDRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 142mW |
| Nominal Supply Current | 640nA |
| Power Dissipation | 142mW |
| Max Supply Current | 640nA |
| Current - Output | 10mA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 30 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV3401IDRG4 Overview
To facilitate transportation, it comes packaged in SOIC .The part will be shipped by Tape & Reel (TR) .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .A total of 8 pins are included.This comparator has 8 pins.This comparator presents a quiescent current of 950nA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 640nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 640nA .The voltage formula shows that the part has a voltage gain of 120dB .Temperatures above 125°C are not recommended.Temperatures below -40°C are not suitable for the device.There is a maximum voltage supply on the comparator of 16V .The comparator is capable of operating at a minimum supply voltage of 2.7V .In order to maintain the quality of the output, 1 channels cooperate together.This device has a 10mA output current.
TLV3401IDRG4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDRG4 Applications
There are a lot of Texas Instruments TLV3401IDRG4 linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Factory automation & control
- Industrial
- Ultra-Low Power Systems
- Self-diagnostics
- Automotive
- Consumer Medical Electronics
- Automatic Test Equipment
- RC Timers
- Wireless Base Stations
