TLV3401IP
| Parameters | |
|---|---|
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLV3401 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 1.2W |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
TLV3401IP Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .Output type CMOS, Open-Drain is used for this comparator.This package has been designed with Tube .There are8 terminals on the comparator.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 1 elements.As a result, it contains 8 pins.The recommended mounting method is Through Hole .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .8 pins are present on the comparator.You can search TLV3401 if you are looking for more pin-to-pin solutions.There is 950nA current flowing in this comparator.There is a Through Hole for mounting it on a PCB or other board.Normal operation of the device requires 640nA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 550nA .Electronic comparator is possible to input a maximum current of 250pA into the device.A voltage gain of 120dB can be determined from the voltage formula for the part.
TLV3401IP Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IP Applications
There are a lot of Texas Instruments TLV3401IP linear comparators applications.
- Hand-Held Electronics
- Current and voltage sensing
- Window Comparators
- Window Comparators, Multivibrators
- Wearable Devices
- High-Speed Differential Line Receiver
- Factory automation & control
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Portable Battery Monitoring
