Parameters |
Input Offset Voltage (Vos) |
3.6mV |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
105dB |
Max Dual Supply Voltage |
8V |
Min Dual Supply Voltage |
1.35V |
Bias Current-Max (IIB) @25C |
0.00025μA |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
1 |
Max Supply Voltage |
16V |
Min Supply Voltage |
2.7V |
Power Dissipation-Max |
240.4mW |
Nominal Supply Current |
640nA |
Power Dissipation |
240.4mW |
Max Supply Current |
640nA |
Current - Output |
10mA |
Propagation Delay |
300 μs |
Quiescent Current |
950nA |
Response Time |
30 μs |
Common Mode Rejection Ratio |
88 dB |
Current - Input Bias |
250pA |
TLV3401IPE4 Overview
A convenient transport package is provided in PDIP .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical General Purpose comparator.The pinout of the component starts from 8 pins it has.There are 8 pins on the comparator.This comparator presents a quiescent current of 950nA .A Through Hole is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.Comparator electronics follows that the voltage gain of the part is 120dB .There is no recommendation for temperatures higher than 125°C .Comparator electronics will not be able to function at temperatures below -40°C .16V is the maximum supply voltage of the comparator.This comparator allows minimum supply voltage of 2.7V .To ensure a high level of output quality, 1 channels work together.This device's output current is rated at 10mA .
TLV3401IPE4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IPE4 Applications
There are a lot of Texas Instruments TLV3401IPE4 linear comparators applications.
- Battery management and protection
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Body Control Modules
- Set Top Boxes
- Window Comparators
- Current and voltage sensing
- Handheld Instruments
- Automatic Test Equipment
- Motor drives