TLV3402CDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3402 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3402CDGK Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type CMOS, Open-Drain output on this device.This chip is designed with the Tube package.The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has a total of 2 elements.There are 8 pins on this board.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.Alternatively, you may search for TLV3402 to find more pin-to-pin solutions for your specific needs.A quiescent current of 950nA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 640nA .A current supply greater than 640nA may cause the comparator to malfunction.You are allowed to input a maximum current of 250pA into the device.In accordance with the voltage formula, the part's voltage gain is 120dB .
TLV3402CDGK Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402CDGK Applications
There are a lot of Texas Instruments TLV3402CDGK linear comparators applications.
- Automotive
- Battery management and protection
- Self-diagnostics
- Wireless Base Stations
- Pulse, Squarewave, and Time Delay Generators
- Wearable Devices
- High-Speed Sampling Circuits
- Set Top Boxes
- Hand-Held Electronics
- Window Comparators, Multivibrators
