TLV3402CDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3402 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3402CDGKR Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is CMOS, Open-Drain .The part is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .This is a typical comparator of type General Purpose .Electronic comparator consists of 2 elements in total.The device contains 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.Try search TLV3402 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 950nA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 640nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 640nA .Input current to the device is limited to 250pA .The voltage formula shows that the part has a voltage gain of 120dB .This device is usually used in ADC circuits (packaged in TR ).
TLV3402CDGKR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402CDGKR Applications
There are a lot of Texas Instruments TLV3402CDGKR linear comparators applications.
- Motor drives
- High-Speed Differential Line Receiver
- Notebooks and PDAs
- Building automation
- Wireless Base Stations
- Threshold Detectors
- Lithium ion battery monitoring
- Wide Range VCO; MOS Clock Timers
- Power management
- Point of load regulators
