TLV3402CDR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3402 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 105 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TLV3402CDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Open-Drain output is used here.Ready for shipping in Tape & Reel (TR) package.You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 2 elements in it.A total of 8 pins are included.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TLV3402 .There is a quiescent current of 950nA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires 640nA supply current.A supply current exceeding 640nA may result in the comparator malfunctioning.Comparator electronics follows that the voltage gain of the part is 120dB .This device is usually used in ADC circuits (packaged in TR ).
TLV3402CDR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402CDR Applications
There are a lot of Texas Instruments TLV3402CDR linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Automatic Test Equipment
- Self-diagnostics
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- Multivibrators and High-Voltage Digital Logic Gates
- Alarm and Monitoring Circuits
- Portable Battery Monitoring
- Window Comparators
- Consumer Medical Electronics
