banner_page

TLV3402CDRG4

Surface Mount Tape & Reel (TR) 10mA mA 175000 ns μs Linear Comparators 120dB dB 250pA pA 640nA μA 3.6mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3402CDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 251
  • Description: Surface Mount Tape & Reel (TR) 10mA mA 175000 ns μs Linear Comparators 120dB dB 250pA pA 640nA μA 3.6mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Max Power Dissipation 710mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.7V
Base Part Number TLV3402
Pin Count 8
Output Type CMOS, Open-Drain
Number of Elements 2
Nominal Supply Current 640nA
Power Dissipation 710mW
Output Current 10mA
Max Supply Current 640nA
Propagation Delay 300 μs
Quiescent Current 950nA
Response Time 175000 ns
Common Mode Rejection Ratio 88 dB
Voltage - Supply, Single/Dual (±) 2.5V~16V ±1.25V~8V
Input Offset Voltage (Vos) 3.6mV
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0001μA
Power Supply Rejection Ratio (PSRR) 105dB
Supply Voltage Limit-Max 17V
Input Bias Current 250pA
Current - Quiescent (Max) 950nA
Voltage - Input Offset (Max) 3.6mV @ 15V
Current - Input Bias (Max) 250pA @ 15V
CMRR, PSRR (Typ) 88dB CMRR, 105dB PSRR
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3402CDRG4 Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Open-Drain output is used here.This package has been designed with Tape & Reel (TR) .The comparator has a total of 8 terminals.Other Comparator like the device play a important role in the industry.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.It's a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.There are 8 pins on this board.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3402 .There is 950nA current flowing in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 640nA .A current supply greater than 640nA may result in the comparator malfunctioning.In accordance with the voltage formula, the part's voltage gain is 120dB .Packed in TR , this device is for general uses (often in ADC circuits).

TLV3402CDRG4 Features


CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB

TLV3402CDRG4 Applications


There are a lot of Texas Instruments TLV3402CDRG4 linear comparators applications.

  • Portable Battery Monitoring
  • Security Detection Systems
  • Factory automation & control
  • Lithium ion battery monitoring
  • Pulse, Squarewave, and Time Delay Generators
  • Notebooks and PDAs
  • Hand-Held Electronics
  • Wide Range VCO; MOS Clock Timers
  • Battery management and protection
  • Current and voltage sensing

Write a review

Note: HTML is not translated!
    Bad           Good