TLV3402IDG4
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV3402 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 142mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 142mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
TLV3402IDG4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of CMOS, Open-Drain .This package has been designed with Tube .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 2 elements.The device includes 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.Electronic comparator has 8 pins.You may wish to search TLV3402 for more solutions that address your specific needs.A quiescent current of 950nA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 640nA .If the current supply exceeds 640nA , the comparator could malfunction.The voltage formula shows that the part has a voltage gain of 120dB .For normal operation, the operating supply voltage must be 15V .
TLV3402IDG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402IDG4 Applications
There are a lot of Texas Instruments TLV3402IDG4 linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Hand-Held Electronics
- RC Timers
- Infotainment and Clusters
- Infotainment & cluster
- Set Top Boxes
- Factory automation & control
- Alarm and Monitoring Circuits
- Appliances
- Window Comparators
