Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
18.99418mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
96.2mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV3402 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Nominal Supply Current |
640nA |
Power Dissipation |
96.2mW |
Output Current |
10mA |
Max Supply Current |
640nA |
Propagation Delay |
300 μs |
Quiescent Current |
950nA |
Response Time |
175000 ns |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
3.6mV |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Supply Voltage Limit-Max |
17V |
Max Input Current |
250pA |
Dual Supply Voltage |
5V |
Input Bias Current |
250pA |
Current - Quiescent (Max) |
950nA |
Voltage - Input Offset (Max) |
3.6mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3402IDGKG4 Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.The comparator has a CMOS, Open-Drain output.This chip is designed with the Tube package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.The device includes 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3402 .There is a quiescent current of 950nA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 640nA in order to use the device normally.If the current supply exceeds 640nA , the comparator might be damaged.You are allowed to input a maximum current of 250pA into the device.The voltage formula shows that the part has a voltage gain of 120dB .The normal operation of the system requires 15V operating voltage.
TLV3402IDGKG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402IDGKG4 Applications
There are a lot of Texas Instruments TLV3402IDGKG4 linear comparators applications.
- Self-diagnostics
- Body Control Modules
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
- Power management
- Consumer Medical Electronics
- Mobile Phones
- Analog front end