Parameters |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
8 |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
2 |
Max Supply Voltage |
16V |
Min Supply Voltage |
2.7V |
Power Dissipation-Max |
240.4mW |
Nominal Supply Current |
640nA |
Power Dissipation |
240.4mW |
Max Supply Current |
640nA |
Current - Output |
10mA |
Propagation Delay |
300 μs |
Quiescent Current |
950nA |
Response Time |
80 μs |
Common Mode Rejection Ratio |
88 dB |
Current - Input Bias |
250pA |
Input Offset Voltage (Vos) |
3.6mV |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0015μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Max Dual Supply Voltage |
8V |
Min Dual Supply Voltage |
1.35V |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
TLV3402IPE4 Overview
For convenience, it is packaged in PDIP .There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical General Purpose comparator.As a result, it contains 8 pins.The comparator has a pin count of 8 .In this comparator, the quiescent current is 950nA .There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.The voltage formula shows that the part has a voltage gain of 120dB .There is no need to exceed 125°C in terms of temperature.Comparator electronics cannot be used at a temperature below -40°C .16V is the maximum supply voltage of the comparator.This comparator allows minimum supply voltage of 2.7V .For the output quality to be maintained, 2 channels work together.Its output current is rated as 10mA .
TLV3402IPE4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402IPE4 Applications
There are a lot of Texas Instruments TLV3402IPE4 linear comparators applications.
- Set Top Boxes
- RC Timers
- Body Control Modules
- Point of load regulators
- Window Comparators, Multivibrators
- Multivibrators and High-Voltage Digital Logic Gates
- High-Speed Differential Line Receiver
- Mobile Phones
- Window Comparators
- General-Purpose, Low-Voltage Applications