TLV3404CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1.022W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV3404 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-8/2.5/16V |
| Nominal Supply Current | 640nA |
| Power Dissipation | 1.022W |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3404CDR Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain is used for this comparator.This chip is designed with the Tape & Reel (TR) package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.The device is equipped with 14 pins.The type of mounting recommended is Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.This comparator has 14 pins.You can search TLV3404 if you are looking for more pin-to-pin solutions.There is 950nA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh +-1.25/+-8/2.5/16V power supplies.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 120dB .Comparator electronics is acceptable to pack the device by TR .
TLV3404CDR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404CDR Applications
There are a lot of Texas Instruments TLV3404CDR linear comparators applications.
- Zero-Crossing Detectors
- Mobile Phones and Tablets
- Hand-Held Electronics
- Handheld Instruments
- Mobile Phones
- Alarm and Monitoring Circuits
- High-Speed Sampling Circuits
- RC Timers
- Ultra-Low Power Systems
- Mobile Communications
