TLV3404CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 720mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3404 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-8/2.5/16V |
| Nominal Supply Current | 640nA |
| Power Dissipation | 720mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3404CPW Overview
For convenience, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a CMOS, Open-Drain output type for this comparator.As a result, it is designed with Tube package.14 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .A total of 4 elements can be found in it.As a result, it contains 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.You can find more pin-to-pin solutions for your special requirements by searching TLV3404 .A quiescent current of 950nA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 640nA supply current.A supply current exceeding 640nA may result in the comparator malfunctioning.In order to operate the device, +-1.25/+-8/2.5/16V power supplies are sufficient.In accordance with the voltage formula, the part's voltage gain is 120dB .
TLV3404CPW Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404CPW Applications
There are a lot of Texas Instruments TLV3404CPW linear comparators applications.
- Automotive
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- High-Speed Sampling Circuits
- High-Speed Differential Line Receiver
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Phones
- Analog front end
