TLV3404CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 720mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3404 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-8/2.5/16V |
| Nominal Supply Current | 640nA |
| Power Dissipation | 720mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3404CPWR Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, Open-Drain output.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.When it comes to types, this comparator is a typical General Purpose .There are a total of 4 elements in it.The pinout of the component starts from 14 pins it has.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator consists of 14 pins.You can search TLV3404 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 950nA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 640nA .A supply current exceeding 640nA may result in the comparator malfunctioning.The device can be operated with +-1.25/+-8/2.5/16V power supplies.From the voltage formula, the voltage gain of the part is 120dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV3404CPWR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404CPWR Applications
There are a lot of Texas Instruments TLV3404CPWR linear comparators applications.
- Consumer Medical Electronics
- Automotive
- Wide Range VCO; MOS Clock Timers
- Body Control Modules
- Self-diagnostics
- Automatic Test Equipment
- Appliances
- Zero-Crossing Detectors
- Power Supervision
- Point of load regulators
