Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
122.413241mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
1.022W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV3404 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Operating Supply Voltage |
15V |
Number of Elements |
4 |
Power Supplies |
+-1.35/+-8/2.7/16V |
Nominal Supply Current |
640nA |
Power Dissipation |
1.022W |
Output Current |
10mA |
Max Supply Current |
640nA |
Propagation Delay |
300 μs |
Quiescent Current |
950nA |
Response Time |
175000 ns |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
3.6mV |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Supply Voltage Limit-Max |
17V |
Max Input Current |
250pA |
Dual Supply Voltage |
5V |
Input Bias Current |
250pA |
Current - Quiescent (Max) |
950nA |
Voltage - Input Offset (Max) |
3.6mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3404ID Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type CMOS, Open-Drain is used for this comparator.This device is designed in Tube case.14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.Electronic comparator has 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .Electronic comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV3404 .There is a quiescent current of 950nA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 640nA for normal use.A current supply greater than 640nA may result in the comparator malfunctioning.The device can be operated with +-1.35/+-8/2.7/16V power supplies.You can input a maximum current of 250pA into this device.Based on the voltage formula, the voltage gain of the part is 120dB .Comparator electronics is necessary to have an operating supply voltage of 15V for normal operation.
TLV3404ID Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404ID Applications
There are a lot of Texas Instruments TLV3404ID linear comparators applications.
- High-Speed Differential Line Receiver
- Limit Comparators
- Threshold Detectors
- Set Top Boxes
- Automatic Test Equipment
- Multivibrators and High-Voltage Digital Logic Gates
- Notebooks and PDAs
- Analog front end
- Automotive
- Industrial