TLV3404IDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 204.4mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV3404 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Nominal Supply Current | 640nA |
| Power Dissipation | 204.4mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3404IDG4 Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with an output type of CMOS, Open-Drain is being used.This chip is designed with the Tube package.14 terminals are found on the comparator.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 4 elements in total.The device includes 14 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.There are 14 pins on the comparator.You may wish to search TLV3404 for more solutions that address your specific needs.The comparator presents a quiescent current of 950nA volts.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh +-1.35/+-8/2.7/16V power supplies.Input current to the device cannot exceed 250pA .The voltage gain of the part is indicated by 120dB in the voltage formula.For normal operation, there should be 15V operating supply voltage applied.
TLV3404IDG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404IDG4 Applications
There are a lot of Texas Instruments TLV3404IDG4 linear comparators applications.
- High-Speed Sampling Circuits
- Wireless Base Stations
- Automotive
- Building automation
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- Metering Systems
- Laptop Computers
- Set Top Boxes
- General-Purpose, Low-Voltage Applications
