TLV3404IDRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 204.4mW |
| Nominal Supply Current | 640nA |
| Power Dissipation | 204.4mW |
| Max Supply Current | 640nA |
| Current - Output | 10mA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 30 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLV3404IDRG4 Overview
The product is packaged in SOIC for ease of transportation.The part is shipped by Tape & Reel (TR) .You can find 14 terminals of the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.The board includes 14 pins.There are 14 pins on the comparator.A quiescent current of 950nA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 640nA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 640nA .According to the voltage formula, the part has a voltage gain of 120dB .In general, temperatures higher than 125°C are not recommended.Lower temperatures than -40°C are unsuitable for it.A comparator's maximum supply voltage is 16V .This comparator can be supplied with a voltage as low as 2.7V .To maintain the output quality, 4 channels work together.10mA is the output current of this device.
TLV3404IDRG4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404IDRG4 Applications
There are a lot of Texas Instruments TLV3404IDRG4 linear comparators applications.
- Factory automation & control
- Infotainment and Clusters
- Self-diagnostics
- Threshold Detectors
- Current and voltage sensing
- Automatic Test Equipment
- Metering Systems
- Hand-Held Electronics
- Power Supervision
- Ultra-Low Power Systems
