TLV3404IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 320.5mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLV3404 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Nominal Supply Current | 640nA |
| Power Dissipation | 320.5mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3404IN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) in order to facilitate transportation.The comparator has a type CMOS, Open-Drain output.Ready for shipping in Tube package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .This element consists of 4 elements in total.The device contains 14 pins.In general, mounting type Through Hole is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.Electronic comparator has 14 pins.You can search TLV3404 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 950nA volts.There is a Through Hole on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 640nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 640nA .The device can be powered by +-1.35/+-8/2.7/16V power supplies.Input current to the device cannot exceed 250pA .A voltage gain of 120dB can be determined from the voltage formula for the part.
TLV3404IN Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404IN Applications
There are a lot of Texas Instruments TLV3404IN linear comparators applications.
- Window Comparators
- Notebooks and PDAs
- Window Comparators
- DC/DC and AC/DC power supplies
- Mobile Phones
- Wireless Base Stations
- Security Detection Systems
- Current and voltage sensing
- Self-diagnostics
- RC Timers
