TLV3404INE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 320.5mW |
| Nominal Supply Current | 640nA |
| Power Dissipation | 320.5mW |
| Max Supply Current | 640nA |
| Current - Output | 10mA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 30 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV3404INE4 Overview
A convenient packaging is provided in the form of PDIP .The comparator has a total of 14 terminals.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .The board includes 14 pins.14 pins are present on the comparator.There is 950nA current flowing in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 640nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 640nA .Based on the voltage formula, the voltage gain of the part is 120dB .In general, temperatures higher than 125°C are not recommended.Comparator electronics cannot be used at a temperature below -40°C .In the comparator, the maximum supply voltage is 16V .A voltage of 2.7V is the minimum supply voltage allowed by this comparator.For the output to be of high quality, 4 channels must cooperate together.A 10mA output current is specified for this device.
TLV3404INE4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404INE4 Applications
There are a lot of Texas Instruments TLV3404INE4 linear comparators applications.
- Portable and Battery-Powered Systems
- Handheld Instruments
- Portable Battery Monitoring
- General-Purpose Portable Devices
- Factory automation & control
- Power Supervision
- Hand-Held Electronics
- Motor drives
- Set Top Boxes
- Limit Comparators
