TLV3404IPWRG4
| Parameters | |
|---|---|
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 105 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 720mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLV3404 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Nominal Supply Current | 550nA |
| Output Current | 10mA |
| Max Supply Current | 550nA |
TLV3404IPWRG4 Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.The comparator has a type CMOS, Open-Drain output.Ready for shipping in Tape & Reel (TR) package.As you can see, the comparator has14 terminals.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.In total, it contains 4 elements.The board includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3404 .There is 950nA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 550nA .A current supply greater than 550nA may result in the comparator malfunctioning.A power supply of +-1.35/+-8/2.7/16V is sufficient for the operation of the device.The voltage gain of the part is indicated by 120dB in the voltage formula.Comparator electronics is acceptable to pack the device by TR .
TLV3404IPWRG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3404IPWRG4 Applications
There are a lot of Texas Instruments TLV3404IPWRG4 linear comparators applications.
- Infotainment and Clusters
- Mobile Communications
- Lithium ion battery monitoring
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- Factory automation & control
- Body Control Modules
- General-Purpose, Low-Voltage Applications
- Appliances
- Portable Battery Monitoring
