TLV341IDBVT
| Parameters | |
|---|---|
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV341 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 75μA |
| Nominal Supply Current | 150μA |
| Output Current | 115mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.3MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
TLV341IDBVT Overview
There is a SOT-23-6 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. Buffer amplifier has a total of 6 pins on it. Please take in mind that op amp should be run at 1.8V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 6 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 300μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 75μA . Voltage gain should remain at 110dB. In total, there are 1 circuits on this buffer amplifier. On the output type, there are Rail-to-Rail different types of op amps. TAPE AND REEL is adopted to pack the instrumentation amplifier.
TLV341IDBVT Features
6 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
TLV341IDBVT Applications
There are a lot of Texas Instruments TLV341IDBVT Instrumentational OP Amps applications.
- Power control
- RF cable systems
- Television
- Fission chambers
- Industrial applications including automation
- Micro signal measurement
- Comparator
- High/low-pass filter circuit
- Integrator circuits
- Commercial audio systems
