banner_page

TLV341IDCKTG4

115mA per Channel 1pA 50 dB Instrumentational OP Amps 0.0002μA 1.5V~5.5V TLV341 6 Pins 6-TSSOP, SC-88, SOT-363


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV341IDCKTG4
  • Package: 6-TSSOP, SC-88, SOT-363
  • Datasheet: -
  • Stock: 519
  • Description: 115mA per Channel 1pA 50 dB Instrumentational OP Amps 0.0002μA 1.5V~5.5V TLV341 6 Pins 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 6-TSSOP, SC-88, SOT-363
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number TLV341
Pin Count 6
Output Type Rail-to-Rail
Number of Circuits 1
Operating Supply Current 75μA
Nominal Supply Current 150μA
Output Current 115mA
Slew Rate 1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 50 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 1.5V~5.5V
Output Current per Channel 115mA
Input Offset Voltage (Vos) 300μV
Bandwidth 2.2MHz
Gain Bandwidth Product 2.3MHz
Unity Gain BW-Nom 2200 kHz
Voltage Gain 110dB
Average Bias Current-Max (IIB) 0.0002μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 5.5V
Low-Bias YES
Micropower YES
Programmable Power NO
Nominal Gain Bandwidth Product 2.2MHz
Max I/O Voltage 4mV
Power NO
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV341IDCKTG4 Overview


The linear amplifier is packaged in a 6-TSSOP, SC-88, SOT-363 case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 6 terminations. Linear amplifier has a total of 6 pins. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 6 pins on it. The input offset voltage is 300μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 75μA , this buffer op amp will be able to operate. The voltage gain should stay at 110dB. On this instrumentation amplifier, there are 1 circuits that are connected together. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is used TR to pack the op amps.

TLV341IDCKTG4 Features


6 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail

TLV341IDCKTG4 Applications


There are a lot of Texas Instruments TLV341IDCKTG4 Instrumentational OP Amps applications.

  • Subtraction operation circuits
  • Power control
  • Band-pass filter
  • Polarized electrodes
  • Comparator
  • Integrator circuits
  • Hand-held batteries
  • Weighing systems
  • Non-polarized electrodes
  • Automotive sensors

Write a review

Note: HTML is not translated!
    Bad           Good