TLV341IDRLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-563, SOT-666 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV341 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 75μA |
| Nominal Supply Current | 150μA |
| Output Current | 115mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.3MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Height | 600μm |
| Length | 1.6mm |
| Width | 1.2mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV341IDRLR Overview
A SOT-563, SOT-666 case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 6. Linear amplifier has a total of 6 pins. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 6 pins. Regarding input offset voltage, op amp rates 300μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. A supply current of 75μA can be used to operate this linear amplifier. 110dB should be the voltage gain. This op amp contains 1 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted.
TLV341IDRLR Features
6 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
TLV341IDRLR Applications
There are a lot of Texas Instruments TLV341IDRLR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- PDA
- Automatic control
- Test equipment
- Test and measurement instruments
- Thermocouples
- Radar
- Signal filtering
- Switching amplifier
- Fast A/D and D/A converters
