TLV342AIDR
| Parameters | |
|---|---|
| Operating Supply Current | 75μA |
| Nominal Supply Current | 300μA |
| Output Current | 115mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 1.25mV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.3MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Max I/O Voltage | 1.25mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV342 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
TLV342AIDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 1.25mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 75μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 110dB's 110dB family. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. It is possible to count 2 elements on this buffer amplifier. An buffer amplifier is packed in a TR-shape according to the design.
TLV342AIDR Features
8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
TLV342AIDR Applications
There are a lot of Texas Instruments TLV342AIDR Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Signal transformation
- Video computer boards
- Division circuits
- Video data acquisition
- Proportional operation circuits
- Radar
- High-frequency data acquisition systems
- Exponential operation circuits
- Weighing systems
