TLV342IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV342 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 75μA |
| Nominal Supply Current | 300μA |
| Output Current | 115mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.3MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV342IDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 1.8V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. There is an input offset voltage of 4mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 75μA, this op amp ic can operate. You should keep the voltage gain at 110dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A voltage rating of 2 is indicated for the op amp's operating supply voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
TLV342IDR Features
8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
TLV342IDR Applications
There are a lot of Texas Instruments TLV342IDR Instrumentational OP Amps applications.
- Instrumentation
- RF cable systems
- Fast A/D and D/A converters
- Home audio systems
- Radar
- Addition operation circuits
- Signal transformation
- Subtraction operation circuits
- Semiconductor detectors
- Video computer boards
