TLV3491AIDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3491 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 1.2μA |
| Output Current | 5mA |
| Max Supply Current | 1.2μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3491AIDBVR Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail output is used here.We ship the part through Tape & Reel (TR) .There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.There are a total of 1 elements in it.Electronic comparator includes 5 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 5 pins.In order to find a solution that meets your specific needs, search TLV3491 for more pin-to-pin solutions.A quiescent current of 1.2μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 1.2μA .If the current supply exceeds 1.2μA , the comparator could malfunction.Input current to the device cannot exceed 10pA .A normal operation requires a voltage of 5V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3491AIDBVR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
TLV3491AIDBVR Applications
There are a lot of Texas Instruments TLV3491AIDBVR linear comparators applications.
- Consumer Medical Electronics
- Point of load regulators
- Power management
- Analog front end
- Window Comparators, Multivibrators
- Set Top Boxes
- Battery-Powered Electronics
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- Automotive
