TLV3491AIDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3491 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 1.2μA |
| Output Current | 5mA |
| Max Supply Current | 1.2μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3491AIDBVT Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.The part is shipped by Cut Tape (CT) .There are5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The total number of elements is 1 .The device is equipped with 5 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 5 pins.You may wish to search TLV3491 for more solutions that address your specific needs.In this comparator, the quiescent current is 1.2μA .A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 1.2μA when using the device.If the current supply exceeds 1.2μA , the comparator might be damaged.Electronic comparator is possible to input a maximum of 10pA current into the device.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV3491AIDBVT Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
TLV3491AIDBVT Applications
There are a lot of Texas Instruments TLV3491AIDBVT linear comparators applications.
- Industrial
- Factory automation & control
- High-Speed Sampling Circuits
- Alarm and Monitoring Circuits
- System control and monitoring
- Analog front end
- Automotive
- Mobile Phones
- Battery-Powered Electronics
- Laptop Computers
